Preparation for Remote Flashing 
 
To install the secure OS on your device

  1. Download the Device image latest version from the below location
    (make sure to choose the right directory based on your phone type):
    Device Images
    (Just select the relevant folder and click the download button at the top )
     
  2. Download the flashing tool (based on your Devise): 

(For Pixel2 and Older – select the KBurner for Oreo, For Pixel3a and up – Kburner for  Android10)
Flashing Tool
The installation files and drivers are for Windows 10 PC only

  1. Download & install AnyDesk (please install, don’t choose run only) https://anydesk.com/en/downloads 
  2. Download & install Zip extractor –free software: 7Zip - https://www.7-zip.org/download.html
  3. Make sure that you have “normal USB to USB type C” cable:

 

Prepare the device for flashing

  • Enable OEM Unlocking (do it on all the devices)
  1. Turn on the device, connect to WIFI, go to settings -> system -> about phone -> press 7 times on “Build number” until you see a massage “you are now a developer”.
  2. Go back one step -> system /developer options -> enable the “OEM unlocking” option.
    • Switch the device to fastboot mode (just before the flashing) 

    1. Click the power button and select restart
      1. Immediately press and hold the volume down button until the device in fastboot
      2. Connect the device to your PC.

Schedule remote session for flashing – use the following link (note: we will need 30 minutes per device)
 
https://calendly.com/shayg/flashing-device 

Flashing process 

    1. During the Flashing process keep the device connected to the PC at all times
    2. You will be asked to accept Unlocking / locking the device bootloader
       to do so you will use the volume up and down buttons to switch between options, and the power down to select (OK)

USB Cable: cid:image001.jpg@01D23FE5.C456A8C0  Fastboot in Oreo: cid:image003.jpg@01D23FE9.362C04B0      fastboot in Android10